This data is provided for the convenience of our customers. It does not on its own represent a sufficient basis for any part design, nor does it provide any agreement about or guarantee the specific properties of a product or part or the suitability of a product or part for a specific application. It is the responsibility of the producer or customer of a part to check its properties as well as its suitability for a particular purpose. This also applies to any possible intellectual property rights as well as regional laws and regulations. The data are subject to change without notice.

PMMA Partikelmaterial (Acrylic Based Powder infused with Wax or Epoxy)


Tensile Strength (Wax Infused)4.3MPa
Tensile Strength (Epoxy Infused)up to 25MPa
Yield Point1%
Burnout Temperature (Wax)600 – 700°C
Residual Ash Content (Wax)< 0.02 – 0.03%
Softening Temperature (Wax)73°C
Softening Temperature (Epoxy)90-93°C
Standard Layer Thickness150µm
X-Y Resolution600DPI