Home › 3D Printing › FDM 3D printing
Fused deposition modeling · Made in Oregon
FDM 3D Printing Service in Engineering Thermoplastics
Our FDM 3D printing service builds parts from real thermoplastics: ABS, Ultem 9085, polycarbonate and carbon-filled nylon. It's our most accurate 3D printing process, and it prints parts up to 36 × 24 × 36 inches.

FDM at a glance
FDM basics
What is FDM 3D printing?
A heated nozzle lays down melted plastic one thin layer at a time, building strong parts in real engineering thermoplastics.
Fused deposition modeling (FDM), also called fused filament fabrication (FFF), builds a part from a spool of plastic filament. The printer melts the filament and extrudes it through a nozzle, tracing the outline and fill of each layer. The platform steps down, and the next layer fuses on top. A separate support material holds up overhangs and is removed after printing.
Because FDM prints the same kinds of plastics used in injection molding, like ABS, polycarbonate and Ultem 9085, parts are tough enough for fixtures, tooling and end-use parts. FDM parts are also geometrically stable, which makes it our most accurate process, especially on big parts: we hold ±0.2%, down to ±0.005″, on parts up to 36 × 24 × 36″.
The trade-offs are surface and direction: layer lines show, and parts are weaker across layers than along them. For the smoothest finish, choose SLA; for strong small parts at the lowest cost per part, choose MJF. Compare all three below.
FDM materials we stock
FDM materials: ABS, Ultem, polycarbonate and carbon nylon
FDM offers the widest range of engineering-grade thermoplastics of any 3D printing process. These five are in our instant quote. Hover a material to see its full data sheet.Tap a material to see its full data sheet.
ABS
Tough, inexpensive and quick to print. The default for fixtures, prototypes and housings.
- Tensile strength
- 4,470 psi (XY)
- HDT @ 264 psi
- 180 °F
- Colors
- White, black, red, blue, yellow
| MechanicalXY / Z | ||
|---|---|---|
| Tensile strength | 4,470 psi (30.8 MPa) | 3,990 psi (27.5 MPa) |
| Tensile modulus | 349 ksi (2,400 MPa) | 334 ksi (2,300 MPa) |
| Elongation at break | 8.1% | 1.8% |
| Thermal and physical | ||
|---|---|---|
| HDT @ 66 psi | 204 °F (96 °C) | |
| HDT @ 264 psi | 180 °F (82 °C) | |
| Glass transition (Tg) | 221 °F (105 °C) | |
| Density | 1.04 g/cm³ | |
| Colors | White, black, red, blue, yellow | |
Typical values from the material manufacturer's data. FDM parts are weaker in Z (across layers) than in XY.
Ultem 9085
High-strength, high-heat polyetherimide, tested to aircraft cabin flame, smoke and toxicity standards.
- Tensile strength
- 10,000 psi (XY)
- HDT @ 264 psi
- 343 °F
- Color
- Natural (tan)
| MechanicalXY / Z | ||
|---|---|---|
| Tensile strength | 10,000 psi (69.2 MPa) | No yield |
| Tensile modulus | 365 ksi (2,520 MPa) | 350 ksi (2,410 MPa) |
| Elongation at break | 5.4% | 1.9% |
| Thermal and physical | ||
|---|---|---|
| HDT @ 66 psi | 350 °F (176.9 °C) | |
| HDT @ 264 psi | 343 °F (172.9 °C) | |
| Glass transition (Tg) | 351 °F (177.3 °C) | |
| Density | 1.27 g/cm³ | |
| Color | Natural (tan) | |
| Flame, smoke, toxicity | ||
|---|---|---|
| Tested per | 14 CFR 25.853, BSS 7238/7239, AITM 2.0007B/3.0005 | |
| Meets | 60 s and 12 s vertical burn, 15 s horizontal burn, smoke density, toxic gas, heat release | |
| On request | Outgassing, NFPA 130, EN 45545-2, UN ECE R118 | |
Typical values from the material manufacturer's data. FDM parts are weaker in Z (across layers) than in XY.
Polycarbonate (PC)
Stronger and more heat resistant than ABS, for parts that take load or sit near heat.
- Tensile strength
- 8,300 psi (XY)
- HDT @ 264 psi
- 261 °F
- Colors
- Black, white
| MechanicalXY / Z | ||
|---|---|---|
| Tensile strength | 8,300 psi (57 MPa) | 6,100 psi (42 MPa) |
| Tensile modulus | 284 ksi (1,958 MPa) | 282 ksi (1,944 MPa) |
| Elongation at break | 4.8% | 2.5% |
| Thermal and physical | ||
|---|---|---|
| HDT @ 66 psi | 280 °F (138 °C) | |
| HDT @ 264 psi | 261 °F (127 °C) | |
| Glass transition (Tg) | 322 °F (161 °C) | |
| Density | 1.20 g/cm³ | |
| Colors | Black, white | |
Typical values from the material manufacturer's data. FDM parts are weaker in Z (across layers) than in XY.
Carbon-filled Nylon 12
Chopped carbon fiber in Nylon 12. The stiffest FDM material we offer in the XY plane, at low weight.
- Tensile strength
- 10,034 psi (XY)
- Tensile modulus
- 602 ksi (XY)
- Color
- Black
| MechanicalXY / Z | ||
|---|---|---|
| Tensile strength | 10,034 psi (69.1 MPa) | 3,684 psi (25.4 MPa) |
| Tensile modulus | 602 ksi (4,150 MPa) | 228 ksi (1,570 MPa) |
| Elongation at break | 4.74% | 2.14% |
| Thermal and physical | ||
|---|---|---|
| HDT @ 66 psi | 136 °F (58 °C) | |
| HDT @ 264 psi | 126 °F (52 °C) | |
| Glass transition (Tg) | 228 °F (109 °C) | |
| Density | 1.14 g/cm³ | |
| Color | Black | |
Typical values from the material manufacturer's data. FDM parts are weaker in Z (across layers) than in XY.
ESD ABS (ABS-ESD7)
Static-dissipative ABS for ESD-safe fixtures, trays and housings in electronics assembly.
- Surface resistance
- 106–109 Ω
- HDT @ 264 psi
- 180 °F
- Color
- Black
| Electrical | ||
|---|---|---|
| Surface resistance | 106–109 Ω (ASTM D257) | |
| Volume resistivity | 3.0×109–4.0×1010 Ω·cm | |
| Mechanical | ||
|---|---|---|
| Tensile strength | 5,200 psi (36 MPa) | |
| Tensile modulus | 350 ksi (2,400 MPa) | |
| Elongation | 3% | |
| Flexural strength | 8,800 psi (61 MPa) | |
| Flexural modulus | 350 ksi (2,400 MPa) | |
| Izod impact, notched | 0.5 ft-lb/in (28 J/m) | |
| Izod impact, unnotched | 1.1 ft-lb/in (55 J/m) | |
| Rockwell hardness | 109.5 | |
| Thermal and physical | ||
|---|---|---|
| HDT @ 66 psi | 204 °F (96 °C) | |
| HDT @ 264 psi | 180 °F (82 °C) | |
| Vicat softening | 210 °F (99 °C) | |
| Glass transition (Tg) | 226 °F (108 °C) | |
| Flammability | UL 94 HB (1.5 mm) | |
| Specific gravity | 1.04 | |
| Color | Black | |
Typical values from the material manufacturer's data sheet.
Need another material or color? Ask us: we can stock special materials for your program.
Flame, smoke and toxicity data for aircraft interiors
Ultem 9085 has been tested per 14 CFR 25.853, BSS 7238 and 7239, and AITM 2.0007B and 3.0005. It meets requirements for 60 s and 12 s vertical burn, 15 s horizontal burn, toxic gas emission, smoke density and heat release rate of cabin materials. Data on outgassing, NFPA 130, EN 45545-2 (rail) and UN ECE R118 (buses) is available on request.
FDM vs MJF vs SLA
Choose FDM when accuracy, size or material matters most.
We run all three processes, so here's an honest comparison. If FDM isn't the right fit for your part, we'll tell you.
| FDM (filament) | HP Multi Jet Fusion | SLA | |
|---|---|---|---|
| Best at | Highest accuracy, engineering thermoplastics, big parts | Strong nylon parts, lowest cost per part at volume | Finest detail and smoothest finish |
| Accuracy | ±0.2%, down to ±0.005″ | ±0.012″ or ±0.2%, whichever is greater | ±0.012″ or ±0.2%, whichever is greater |
| Largest part | 36 × 24 × 36″ (13.75 × 13.75 × 17.70″ in the instant quote) | 14.95 × 11.18 × 14.95″ | 13.9 × 7.7 × 13.8″ |
| Materials | ABS, Ultem 9085, polycarbonate, carbon-filled Nylon 12, ABS-ESD7 | Nylon 12 | Clear and white resins, Elastic 50A, Flexible 80A |
| Surface | Visible layer lines; rougher | Fine matte | Smoothest |
| Large flat parts | Stay flat | Can warp; add ribs | Can warp; add ribs |
| Supports | Needed past 45° | None needed | Needed (small marks) |
Specs from our instant quote guidelines and FDM design guidelines. See HP Multi Jet Fusion and SLA for those processes.
Where FDM wins
Pick FDM for
- Tight tolerances on large parts. FDM parts are geometrically stable, so accuracy holds as parts get bigger.
- Engineering plastics you can't get in powder or resin, like flame-rated Ultem 9085 and inherently dissipative ABS-ESD7.
- Big fixtures, tools and housings in one piece, up to 36 × 24 × 36″.
- Durable functional parts: fixtures, stamping tools and form-fit-function models.
Where it doesn't
Pick something else for
- Cosmetic surfaces. Layer lines show; SLA gives the smoothest finish.
- High quantities of small parts. Prints are slower, and MJF nylon is cheaper per part at volume.
- Snap fits and living hinges. FDM parts are weaker across layers; MJF Nylon 12 is the better choice.
- Fine detail and small holes. FDM's minimum hole is 0.080″ and its text needs to be 0.200″ tall.
FDM specifications
FDM tolerances, build size and minimum features
These are the numbers we hold in production, not printer brochure figures. They're guidelines, not hard rules: we'll tell you if we see a problem with your design.
| Spec | Inches | Millimeters |
|---|---|---|
| Maximum part size | 36 × 24 × 36 (larger in sections, assembled after printing) | 914 × 609 × 914 |
| Instant quote build limit | 13.75 × 13.75 × 17.70 (larger parts by custom quote) | 349 × 349 × 450 |
| Expected tolerance | ±0.2%, minimum ±0.005 | ±0.2%, minimum ±0.13 |
| Layer height (resolution) | 0.010 standard, 0.013 low resolution, 0.007 high resolution | 0.25 / 0.33 / 0.18 |
| Minimum wall, supported / unsupported | 0.040 / 0.020 | 1.00 / 0.50 |
| Minimum boss, supported / unsupported | 0.040 / 0.020 | 1.00 / 0.50 |
| Minimum embossed or engraved detail | 0.040 height and width | 1.00 |
| Clearance between parts | 0.020 | 0.50 |
| Minimum hole | 0.080 | 2.0 |
| Overhangs and bridges | Supports past 45°; bridges up to 0.400 | Bridges up to 10 |
| Lead time | Rush ships in 2 business days, Standard in 5 (instant quote). Large-format parts: typically 2–3 weeks, confirmed in your quote. | |
Need a feature tighter than ±0.005″? Send a drawing; we can CNC post-machine critical features. Full rules: FDM design guidelines.
Large-format FDM
Print large parts up to 36 × 24 × 36 inches.
We print fixtures, tools, housings and models at that size in one piece. Bigger parts are printed in sections and assembled after printing.
- Accuracy that holds at size. FDM gives some of the tightest 3D printing tolerances on large parts, because they stay geometrically stable.
- No warped plates. Large flat parts can warp in every process except FDM.
- Engineering plastics, big. ABS, polycarbonate and Ultem 9085 at full size, in Stratasys materials. We can stock special materials for your program.
- Lead time. Large-format parts typically take 2–3 weeks.
- Quoted by an engineer. Parts over 13.75 × 13.75 × 17.70″ go through a custom quote, back within 24 hours.
"I've been looking for a large scale 3-D printer for a work project… Only one of them seemed to care about our project: Andrew LaPlant at RapidMade."Jeffrey Petrovic, Google review
Making molds or casting patterns? See our large-format 3D printing, up to 39.4 × 23.6 × 19.7″.
What FDM is good for
FDM parts for the shop floor and the final product.
Industrial thermoplastics make FDM parts strong and durable enough to use, not just look at.
Jigs & fixtures
Assembly, inspection, drilling and holding fixtures, made in days with no tooling.
Try ABS or Nylon 12 CF
Tooling
Stamping tools, forming tools and end-of-arm tooling that need stiffness and heat resistance.
Try polycarbonate or Ultem 9085
Functional prototypes
Mechanical prototypes and form-fit-function models in the same family of plastics as your production part.
Try ABS or polycarbonate
End-use parts
Small-batch production, flame-rated interior parts and ESD-safe parts for electronics handling.
Try Ultem 9085 or ABS-ESD7
Designing for FDM
Six FDM design tips that save time and money
The short version. Our FDM design guidelines have the full rules.
Orient for strength
Parts are weakest across layers. Tell us which way the load runs and we'll orient the part to match.
Keep overhangs under 45°
Steeper overhangs need supports, which add cost and leave marks. Bridges up to 0.400″ print clean.
Size holes for the process
Keep holes 0.080″ or larger. For a precise fit, model the hole undersized and ream it, or ask for post-machining.
Use inserts, not threads
Small printed threads aren't recommended. Tap after printing, or use brass heat-set inserts.
Keep walls even
Stay between the 0.040″ supported minimum and 0.250″, and fillet inside corners to cut stress.
Make text bold
Use text at least 0.200″ tall with a 0.040″ stroke and depth so it reads clearly.
Not sure your part is ready? Send it anyway. Every order is engineer reviewed, and we'll flag problems before we print.
Full FDM design guidelines →How an FDM order works
From CAD file to FDM parts in four steps.
Upload your CAD
STEP, STL, SLDPRT and 45+ other formats, up to 50 MB, one part per file. Set units for STL files.
Pick material and speed
Choose FDM, your material, finish, quantity and Rush or Standard, and see the price right away.
An engineer checks it
Every order is engineer reviewed before it prints. Pay by card, or by invoice with a PO if you're approved for terms.
Printed, inspected, shipped
Rush ships in 2 business days, Standard in 5. ISO 9001:2015 inspection, with FAIR, CoC and material certs on request.
Your 3D print specialist
Talk to Andrew LaPlant
"I'll help you choose the right process and material for how your part will actually be used, from a quick-turn prototype to a production run. I'm honest to a fault: if 3D printing isn't the right fit, I'll tell you and point you to a better option."
- Call(971) 727-3403
- Emailaglaplant@rapidmade.com
Pricing and ordering
Simple terms
- Minimum order$250 instant quote, $500 custom quote
- PaymentCredit card, or invoice with a PO if you're approved for terms
- VolumeVolume discounts, plus rolling POs that lock in low volume pricing for up to 12 months
- FinishingHeat-stake inserts, CNC post-machining, ESD coating, automotive paint and more
- PickupWill call for Oregon and Washington customers
40 employees · 30,000 sq ft · Tualatin, OR
A real factory near Portland, not a marketplace.
- We print your parts in our own shop in Tualatin, Oregon, in the Portland metro area
- ISO 9001:2015 quality system and in-house engineering
- FAIR, CoC, material certs, FDA and RoHS/REACH documentation
- ITAR registered and CMMC Level 2, with secure file transfer on request
- MJF, SLA, thermoforming and CNC machining under the same roof when FDM isn't the answer
FDM 3D printing service FAQ
What is FDM 3D printing?
Fused deposition modeling (FDM), also called fused filament fabrication (FFF), builds plastic parts by extruding thermoplastic filament in thin layers. Industrial FDM uses engineering plastics like ABS, polycarbonate and Ultem, so parts are strong and accurate enough for fixtures, tooling, prototypes and small-batch production.
How accurate is FDM 3D printing?
We hold ±0.2%, with a minimum of ±0.005″. FDM is our most accurate 3D printing process, especially on large parts. If a feature needs to be tighter, send a drawing and we can CNC post-machine it.
What's the largest part you can print with FDM?
Up to 36 × 24 × 36 inches in one piece. Larger parts can be printed in sections and assembled. The instant quote takes parts up to 13.75 × 13.75 × 17.70″; send anything bigger through the custom quote form.
Which FDM materials do you offer?
ABS, Ultem 9085, polycarbonate, carbon-filled Nylon 12 and static-dissipative ESD ABS (ABS-ESD7, for ESD-safe parts), all in the instant quote. Large-format parts run in ABS, polycarbonate and Ultem 9085.
Is Ultem 9085 flame retardant?
Ultem 9085 has been tested per 14 CFR 25.853, BSS 7238 and 7239, and AITM 2.0007B and 3.0005, and meets requirements for vertical and horizontal burn, smoke density, toxic gas emission and heat release of aircraft cabin materials. That's material test data; tell us if your part needs specific documentation.
What colors and resolutions can I order FDM parts in?
ABS comes in white, black, red, blue and yellow; Ultem 9085 in natural (tan); polycarbonate in black and white; carbon-filled Nylon 12 and ESD ABS in black. Standard resolution is a 0.010″ layer, with 0.013″ low resolution and 0.007″ high resolution available.
How fast can I get FDM parts?
Instant-quote orders placed before 1 PM Pacific on a weekday ship in 2 business days with Rush or 5 with Standard. Large-format parts typically take 2–3 weeks, and very large orders may take longer; we confirm the ship date in your quote.
Should I choose FDM, MJF or SLA?
Choose FDM for the highest accuracy, engineering plastics like Ultem and polycarbonate, and big parts. Choose HP Multi Jet Fusion for strong nylon parts and the lowest cost at volume. Choose SLA for the finest detail and finish. You can quote the same part in all three and compare.
How strong are FDM parts?
Strong along the layers, weaker across them. For example, carbon-filled Nylon 12 is rated at about 10,000 psi in XY but about 3,700 psi in Z. Tell us how your part is loaded and we'll orient it so the load runs along the layers.
How much does FDM printing cost?
Upload your file to the instant quote and the tool prices it as you pick material, quantity and lead time. Order minimums are $250 for instant quotes and $500 for custom quotes. We offer volume discounts and rolling POs that lock in pricing for up to 12 months.
Can you handle ITAR-controlled FDM parts?
Yes. RapidMade is ITAR registered and CMMC Level 2. The instant quote isn't a secure system for controlled data, so email info@rapidmade.com for access to our secure file-sharing server instead.
ABS · Ultem 9085 · Polycarbonate · Nylon 12 CF
Get an instant FDM 3D printing quote.
Upload your CAD file, pick a material and see your price. Rush orders ship in 2 business days.